Jual Alumunium Jacket Sheet Insulation Pipa
Jual Aluminium Cladding Sheet, Jual Aluminum Jacketing with Polycraft, Jual Aluminum Jacket with Polysurlyn, Jual Aluminum Roll Jacketing, Jual roll jacketing, Jual Insulation Pipa Jacket, jual jacketing pipa, Jual ALUMINIUM JACKETING ROCKWOOL, Jual Pipa Rockwool, Jual Jacketing Alumunium Sheet Roll 0,4 Mm – 0,8 Mm, Jual Alumunium Foil, Jual peredam panas, Jual Alumunium Foil Double Side 120cm X 100cm
Specification Product
- Aluminum Tread Plate
- 1060 Aluminium Sheet
- 1100 Aluminium Sheet
- 3003 Aluminium Sheet
- 5083 Aluminium Sheet
- 5086 Aluminium Sheet
- 5052 Aluminium Sheet
- 6061 Aluminium Plate
- 1050 Aluminium Sheet
- 6063 Aluminium Plate
Aluminium jacket is typically manufactured using alloys AA 3003, 3105, 1050, 1060, 1070, 5052, 5005 which have very similar composition and performance and are considered interchangeable for widely used for the purpose of insulation jacketing.
Grade: 1006, 1100, 3003, 3105, 5005
Temper: O, H12, H14, H16, H24, etc.
Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14
Type: Coil roll
Application: Industrial insulation jacketing, cover, insulation protective jacketing
Thickness: 0.3-1.5mm
Width: 914mm, 1000mm, 1219mm
Length: 20, 25,30, 60, 90m per roll or as per clients
Surface Treatment: Plain, Flat, mill finish, Embossed
Moisture barrier: polysurlyn, craft paper
Certificate: ISO9001, GB/T3880, ASTM B209
Packaging: packed in carton or coil in wooden pallet
Delivery time: 25-45 days
Minimum order quantity: 2 tons
Specification of aluminum jacket for pipe insulation
| Alloy | Thickness(inch) | Thickness(mm) | Width(mm) | Length(m) | Suggested Application | |
| 1100, 1060, 3003, 3105, 5005 | H14, H16 | 0.012 | 0.3 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36″(914mm) insulated pipe lines. |
| 0.016 | 0.4 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36″(914mm) insulated pipe lines. | ||
| 0.020 | 0.5 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36″(914mm) insulated pipe lines. | ||
| 0.024 | 0.6 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD 36″-8′ (914mm-2.43m) insulated pipe lines&equipment. | ||
| 0.032 | 0.8 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications. | ||
| 0.040 | 1.0 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | special applications where heavy mechanical is required. | ||
| 0.050 | 1.2 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | flat ducts or precipitators. Also recommended for areas subject to high wind conditions. |
Remarks: Other sizes available upon request.
Chemical Composition of aluminum jacketing
Commercially pure aluminum is relatively soft and less suited for use in this application. Its strength can be greatly improved by alloying with small percentages of one or more other elements such as manganese, silicon, copper, zinc, and magnesium. Additional strength can be achieved by cold working. Haomei aluminum metal jacketing have the highest quality, are corrosion resistant, and comply with all relevant standards.
| Alloy | Si | Fe | Cu | Mn | Zn | Mg | Ti | Cr | Other Elements | Al | |
| Each | Total | ||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.05 | 0.03 | 0.03 | – | 0.03 | 99.6min | |
| 1100 | Si+Fe=0.95 | 0.05-0.20 | 0.05 | 0.10 | – | – | – | 0.05 | 0.15 | 99.0min | |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.50 | 0.10 | – | – | – | 0.05 | 0.15 | reminder |
| 3105 | 0.6 | 0.7 | 0.30 | 0.30-0.80 | 0.40 | 0.20-0.80 | 0.10 | 0.20 | 0.05 | 0.15 | reminder |
| 5005 | 0.3 | 0.7 | 0.20 | 0.20 | 0.25 | 0.50-1.10 | – | – | 0.05 | 0.15 | reminder |
SURFACE FINISHES
Each of the three surface finishes available for ITW Aluminum Jacketing (smooth, stucco embossed, and 3/16”corrugated has applications where it is recommended. All of these can be supplied with a painted exterior. For more information on this, consult the ITW data sheet on painted aluminum jacketing.
Smooth (Plain Mill) Finish
This is a very popular finish and is the “default” for the many end-users/specifiers who prefer the clean look of this finish.
This finish sheds rain water the best. However, this smooth surface readily shows damage such as from hail or other physical abuse. It is also shows the dirt more than the other finishes due to its smoothness. Lastly, it is highly reflective of sunlight and when located near roadways, some specifiers
see this reflection as a possible safety hazard.
Stucco Embossed Finish
This is another popular finish used for aluminum jacketing. The stucco-like surface texture hides small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.
Moisture barrier
Polysurlyn
Polysurlyn Moisture Barrier (PSMB) is an engineered three layer coextruded film of polyethylene and DuPont Surlyn polymers with a total film thickness of 3 mils (76 μm). PSMB is heat laminated in the factory to the interior surface of all types of aluminum metal jacketing for mechanical insulation to help prevent pitting, crevice, and galvanic corrosion of the interior surface of the aluminium metal jacketing and the underlying insulated pipe, tank or equipment. Due to its superior performance characteristics, PFMB replaces the old moisture barrier technology of 1 to 3 mil thick polykraft.
Polykraft
Polykraft (PKMB) consists of one layer of one mil polyethylene film with a protective layer of 40# virgin kraft paper. The moisture barrier is factory applied by attaching the aluminum jacketing by continuous lamination to the full width of the metal. The moisture barrier is used to prevent moisture and corrosives in the insulation from coming into direct contact with the aluminum metal jacketing surface and causing galvanic or chemical corrosion.
Kami juga menjual
jual Control Valve Ari armaturen, harga Control Valve Fishe, Jual Spirax Sarco Control Valve 21/2 Pn40, jual Control Valve Spirax Sarco 1 Inch, jual Directional Control Valve Hydraulic, jual Flow Control Valve 1-1/4 3000 psi, jual Control Valve Hydraulic, jual Parker 106053 Control Valve, jual Flow Control Valve Parker F800s, Hand Valve / Hand Control / Control Valve Hidrolik .
valves, A105 Globe Valve 800 LB Flanged Ends Bolted Bonnet , Jual Flow Control Valve Globe Type DN 50 PN 16 A351 CF8 , Jual DIN 3352 Globe Valve ASTM A216 WCB DN200 PN40 , Jual Flange Globe Valve , Angle Globe Valve , Marine Globe Valve , Jual Cast Steel Globe Valve , Jual On / Off Globe Valve , Jual Bronze Globe Valve , Jual Gate Valve , Jual Butterfly Valve , Jual Butterfly Valve WKM, Hex Reducing Coupling, Hollow Bar, Instrument Ball Valves, Instrument Bulkhead, Instrument Fitting, Instrument Needle Valve, Instrument Valves, Manifold Valve, Mono Flanges, Orifice Flanges, Orifice Plates, Pinch Valve, Pipa, Pipa Bakrie, Pipa Cement Linning, Pipa Galvanized, Pipa HDPE, Pipa Hitam SCH 40, Pipa Nipple, Pipa Spiral, Blind Flanges, Flange PN, Flange Sight Glass, Flanges, orifice flange, Slip On flange, WN Flange, Barred Tee, Buttweld Fittings, Cap & End Cap, Coupling, Double Niple, Elbow, Hex Head Bushing, Ball Valve, Basket Type Strainer,Bleed – Drip Rings, Breather Valve, Butterfly Valve, Check Valve, Choke Valve, Desuperheater Valve, Diaphragm Valve, Dome Valve, Emergency Shutdown Valve, Filter Valve, Gate Valve, Globe Valve
Reviews
There are no reviews yet.