Pipa Medium Galvanis A53 GR B – Jual pipa galvanis A53 GR A

AISI 4130 5D Elbow / 5D Bend Dimensioong radius 90° elbows 3D, 5D, and 6D in sizes up to and
including 4” are provided with 4” (102 mm) long tangents,
sizes 5” to 10” are provided with 1D long tangents and
sizes 12” to 24” are provided with 12” (305 mm) long
tangents. Elbow Long Bends 5D

nd Preparation: Roll-grooved to AWWA C606-04 and or
ISO/FDIS 6182-12. For dimensional tolerances of cast
fittings, refer to ISO/FDIS 6182-12 Table 3.Plain-end, beveled end or cut-grooved end are also
available upon request.Material: standard wall steel pipe to ASTM A53, Grade B.Other materials available on request.C to E tolerances:2” through 6” : ±⅛” (3.2 mm); 8” through 16” : ±¼” (6.4 mm);18” through 24” : ±⅜” (9.5 mm) ; 28” : ±1½” (12.7 mm)All weights are approximate, based on calculated weight of pipe

MODEL L90-5D WROUGHT 5D 90° ELBOW

L60-5D WROUGHT 5D 60° ELBOW

L45-5D WROUGHT 5D 45° ELBOW

L30-5D WROUGHT 5D 30° ELBOW

L22-5D WROUGHT 5D 22½° ELBOW

L11-5D WROUGHT 5D 11¼° ELBOW

ANSI B16.9 Butt Weld Fittings

Grades – ASTM A420 WPL6, MSS SP WPH-Y52, AISI 4130

Sizes – 2” N.B. to 8” N.B.

Wall Thickness – Sch 80 to Sch XXS

Types – AISI 4130 5D Elbow / 5D Bend, Elbows, Tees, Reducers, Caps, etc.

AISI 4130 5D Elbow / 5D Bend features:

Eliminates post weld heat treatment requirements that restrict the material’s potential strength.

Have smooth round uninterrupted bores to minimise pressure drop and turbulence.

Inherently stronger.

End fittings machined integrally.

Do not require costly weld inspection.

AISI 4130 5D Elbow / 5D Bend with fully pressure tested and certified.

Full material tractability.

AISI 4130 5D Elbow / 5D Bend Dimension

Long radius 90° elbows 3D, 5D, and 6D in sizes up to and
including 4” are provided with 4” (102 mm) long tangents,
sizes 5” to 10” are provided with 1D long tangents and
sizes 12” to 24” are provided with 12” (305 mm) long
tangents. Elbow Long Bends 5D

End Preparation: Roll-grooved to AWWA C606-04 and orISO/FDIS 6182-12. For dimensional tolerances of cast
fittings, refer to ISO/FDIS 6182-12 Table 3.Plain-end, beveled end or cut-grooved end are also
available upon request.

Material: standard wall steel pipe to ASTM A53, Grade B.Other materials available on request.

C to E tolerances:2” through 6” : ±⅛” (3.2 mm); 8” through 16” : ±¼” (6.4 mm);18” through 24” :±⅜” (9.5 mm) ; 28” : ±1½” (12.7 mm)

All weights are approximate, based on calculated weight of pipe

MODEL L90-5D WROUGHT 5D 90° ELBOW

L60-5D WROUGHT 5D 60° ELBOW

L45-5D WROUGHT 5D 45° ELBOW

L30-5D WROUGHT 5D 30° ELBOW

L22-5D WROUGHT 5D 22½° ELBOW

L11-5D WROUGHT 5D 11¼° ELBOW

ANSI B16.9 Butt Weld Fittings

Grades – ASTM A420 WPL6, MSS SP WPH-Y52, AISI 4130

Sizes – 2” N.B. to 8” N.B.

Wall Thickness – Sch 80 to Sch XXS

Types

L11-5D WROUGHT 5D 11¼° ELBOW

ANSI B16.9 Butt Weld Fittings

Grades – ASTM A420 WPL6, MSS SP WPH-Y52, AISI 4130

Sizes – 2” N.B. to 8” N.B.

Wall Thickness – Sch 80 to Sch XXS

Types – AISI 4130 5D Elbow / 5D Bend, Elbows, Tees, Reducers, Caps, etc.

AIty.