Hydro Test
Jual Haskel Hydrostatic Test Pump Systems, Jual Haskel Pump 10000 psi, Jual Asada Testing Pump, Jual Terada Water Pressure Test Pump, Jual Relief Valve Haskel 15700 – 25 Range 2500 – 25000 psi, Jual Relief Valve Haskel 1000 psi – 10000 psi, Jual Check Valve Haskel Gas Pressure 10000 psi ,
Model
- TEST PAC 33
• 1/3rd HP output with test pressures up to 1,000 bar with oil, 700 bar with water
• Typical flow rate up to 6 litre/min for low pressure units down to 0.2 litres/min for 1,000 bar unit
• Supplied with 4 litre polyethylene tank
• Removable hand pump can be used with this system when compressed air is not available. It also allows for finer control for calibration work. - PORTABLE M POWERPAC
• 1/3rd HP output using the range of pumps in the Test Pac 33
• Configured as a stainless steel carry case with integral stainless steel reservoir, ideal for onsite testing and calibration
• Hand pump option is available for this model - OFFSHORE TEST PAC 200
• 1.5 HP output with pressure capability up to 2,000 bar on both oil and water service
• Mounted within a stainless steel frame with horizontal control panel and 10 litre stainless steel reservoir as standard
• 14 models to choose from TEST PAC 200
• 1.5 to 2 HP output with pressure capability up to 3,000 bar on both oil and water service
• Mounted within a mild steel painted frame with vertical control panel and 5 litre polypropylene reservoir as standard
• 18 models to choose from - TEST PAC 200
• 1.5 to 2 HP output with pressure capability up to 3,000 bar on both oil and water service
• Mounted within a mild steel painted frame with vertical control panel and 5 litre polypropylene reservoir as standard
• 18 models to choose from - OFFSHORE TEST PAC 300
• 3 HP output with pressure capability up to 1,400 bar on both oil and water service
• Mounted within a stainless steel frame with horizontal control panel and as standard
• 8 models to choose from - TEST PAC 600-SS
• 6 HP output with pressure capability up to 700 bar on both oil and water service
• Mounted within a stainless steel mobile frame with horizontal control panel, with or without 20 litre reservoir as standard
• 6 models to choose from - TEST PAC 1000
• 10 HP output with pressure capability up to 2,000 bar on both oil and water service.
• Mounted within a mild steel base frame with vertical control panel as standard
• 4 models to choose from - DUAL PUMP SYSTEMS
Available with any of the full Haskel range of pumps. Options available for:
• Standby pumping systems
• Low-pressure, high-flow prefill and high-pressure, low-flow test
• With or without fluid storage
• Mobile on fixed skids
Feature
The Portable Hydrostatic Pressure Test System’s main application is performing hydrostatic pressure testing. This testing is conducted as a check on pressure vessels for leaks and the overall integrity of a given system. The testing process begins with determining a pressure for the test. Then liquid is pumped through the hydrostatic test system to achieve pressurization to the predetermined pressure, while allowing for visual inspection of the system’s integrity.
From 1/3rd HP up to 10 HP with pressure capabilities up to 7,000 bar, these self-contained units are powered by compressed air and designed for use with a wide range of fluids; however, units for use on water, oil, or soluble oil/water are common.
Each Portable Pressure Test System is supplied with the following:
- Haskel air-driven hydrostatic test pump
- Air controls, including air filter, air pressure regulator, air gauge on/off speed control valve, and air exhaust silencer
- Fluid inlet connection located at skid edge*
- Fluid inlet suction strainer
- Outlet pressure gauge, glycerine filled with stainless steel case
- Pressure release valve
- Fluid outlet connection located at edge of frame
- Mounted within a robust stainless portable frame
- All suitably piped and pressure tested
